Chimney Framing
In Norwich

The chimney framing has to be in the correct place. 

In our case...we were about a foot out. The bricklayers just had to make the proper adjustment...

Chimney Framing
To Clear The Rafters

You want the chimney to clear the rafters or you have to cut away the roof truss. Which is not a good idea unless you are a roofing engineer

The bricklayers just adapted. They made a bend at the back.

Using a double skin brick for the fireplace walls is better than the single skin we used and will give a more attractive fireplace. Strong enough to take the weight of the whole chimney.

And if you build the chimney in the middle of your house – and not on an outside wall - you save heat.

A Straight Run To The Top

Get that chimney in the right place - first time. There are no second chances.

See how the chimney now passes between the rafters without any hint of a problem?

Later you may have to decide on which wood burning stove you will select - that's if you don't want an open fire.

If you feel the cold go for the bigger stove.

We chose a 5kw wood burning stove to heat a four bedroom house. But we do need to give it a boost during the very cold weeks.

Before we leave the fireplace take a look at the brickwork. Choose bricks that are really colourful not the wall bricks which would give a very boring effect.

When the bricklayers finished the fireplace they carried on up through the house with the chimney, going between the rafters and out to the roof.

Now I've shown you how to build a chimney it’s time to build the chimney liner.

The Isokern flue system was supplied by a Norwich company and uses a separate inner flue and outer case. The one I used combined the two in one block. Pumice is volcanic and comes from Iceland. It's a very effective insulation material and enables the flue temperature to rise rapidly.

Place two lintels to sit on the fireplace brickwork. Fix the support block on top of the lintels and then start building your liner. Just before going through the roof insert a corbel to support the brick cladding.

Father and Son Finishing the Chimney

A concrete capping on the top protects the brickwork and helps to support the last flue block or chimney pot.

From Chimney Framing to  New Build

Restore Norwich Home > Chimney Framing

All Information on this website is provided for educational purposes only.  Please seek professional advice for your restoration project.

Restore Norwich  4a Norwich Road, Hapton, Norwich NR15 1SD Tel: 01508 481957 Mob: 07930 355926. Serving Norwich, in, Mulbarton, Wreningham, Wymondham, Hethersett, Tacolneston, Old Buckenham, Long Stratton, Tasburgh, Attleborough, Hempnall, Fritton, Kirstead Green, Woodton, Broome, Hales, Wicklewood, Hingham, Deopham Green, Cringleford, Rockland St Mary, Thurton, Poringland, Shotesham and rest of South Norfolk.

Copyright © 2020 -